Switch, On/Off
|
|
|
On/Off circuit breaker switch.
***NOTE*** This switch can come with 2 or 3 prongs. The third prong is only a ground. Therefore, the two or three prong will be interchangeable and can be used in place of one another. If you have the three prong and receives the two, you simply need to attach the ground to the machine. ** |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | Screw | 4 | 3 | Clamp, Cable, Long | 2 | 4 | HB,L/R,ARPS,EBONY | 2 | 5 | Screw, Self Drilling | 15 | 6 | NLA Safety Key | 1 | 7 | Hole Plug | 1 | 8 | FRAME,LIFT,EBONY 140823M | 1 | 9 | Endcap, Round, Internal | 2 | 10 | CVR,HI-VOLTAGE,EBONY 176078E | 1 | 12 | BATCVR,2.38X3.25"L 129639F | 1 | 13 | RPM Sensor | 1 | 14 | Screw | 2 | 15 | LEG,BASE,EBONY 165002V | 2 | 16 | Screw | 4 | 17 | NUT,CAGE,BlackZP,1/4-20,FITS.39" | 4 | 18 | Belt, Drive | 1 | 19 | Bolt | 2 | 20 | Washer | 1 | 21 | Washer, Star | 1 | 22 | Nut | 1 | 23 | NLA Motor, Drive w/flywheel | 1 | 24 | NLA Flywheel, Motor | 1 | 25 | NLA Motor, Drive | 1 | 26 | Screw | 1 | 27 | Cable Tie | 5 | 28 | Screw | 17 | 29 | HOOD,WLTL21104,ARPS | 1 | 30 | HOOD,BACK,EBONY 187280E | 1 | 32 | Screw | 7 | 33 | Bumper, Leveler | 4 | 34 | BLYPN,FLAT,BASE 138910C | 1 | 35 | Controller, MC1000 | 1 | 36 | Screw | 2 | 37 | Washer, Flat | 2 | 38 | UPRT,BASE,EBONY 214982A | 1 | 39 | Screw | 4 | 40 | Washer, Flat | 4 | 41 | Screw | 2 | 42 | Wheel, Transport | 6 | 43 | Nut, Nylock | 6 | 44 | LEG,BASE,ARPS,EBONY | 2 | 45 | Switch, On/Off | 1 | 46 | Grommet, Strain Relief | 1 | 47 | Power Cord | 1 | 48 | Nut, Motor | 1 | 49 | Display, Console | 1 | 50 | RAIL,DECK,ARPS,RT,EBONY | 1 | 51 | Screw | 4 | 52 | Screw | 1 | 53 | WIRE,HRNS,ARPS | 1 | 54 | Screw | 2 | 55 | Wheel | 2 | 56 | Tool, Adjustment, Belt | 1 | 57 | Choke | 1 | 58 | Guide, Belt | 2 | 59 | Decal, Warning | 1 | 60 | Spring, Deck | 1 | 61 | LATCH,CATCH,EBONY 138732f | 1 | 62 | NLA Spacer, Plastic | 1 | 63 | Magnet | 1 | 64 | Screw | 2 | 65 | BLYPN,LIFT MTR,ARPS | 1 | 66 | Latch | 1 | 67 | Treadbelt | 1 | 68 | Wire Tie | 3 | 69 | Clamp, Holder, Tie, Flat | 4 | 70 | WIRE,HRNS,080"L 217970A | 1 | 71 | Deck | 1 | 72 | Spacer, Plastic | 1 | 73 | RAIL,DECK,ARPS,LT,EBONY | 1 | 74 | Retainer Clamp | 1 | 75 | Roller, Front | 1 | 76 | Screw | 10 | 77 | Wire, Jumper | 1 | 78 | Bolt, Roller, Adjusting, Rear | 2 | 79 | ENDCAP,REAR,LT,EBONY 186905E | 1 | 80 | Grommet | 1 | 81 | Tool, Belt Adjustment | 1 | 82 | Decal, Warning | 1 | 83 | Roller, Rear | 1 | 85 | Book Rack, Console | 1 | 86 | Endcap, Deck Rail, Right | 1 | 87 | CNSL,BASE,ARPS,LIBRA,EBONY | 1 | 88 | Bracket, L,DRIVE BELT | 1 | 90 | ENDCAP,REAR,RT,EBONY 186906E | 1 | 91 | ENDCAP,DECKRAIL,LT 188535C | 1 | 93 | NLA Bracket, Incline, Stop | 1 | 94 | Screw | 1 | 96 | NLA Motor, Incline | 1 | 97 | Bracket, CIR BRD 217985- | 1 | 98 | Fastener, Standoff | 4 | 99 | CIRBRD,SNUBBER BRD,ARPS | 1 | 100 | Nylock Hex Nut | 4 | | Screw | 15 | | Wire Harness, Black | 1 | | Envelope | 1 | | Screw | 1 | | WIRE,PIGTAIL,008" G01778EB | 1 | | Wire Harness, Jumper, Black | 1 | | Jumper Wire | 1 | | Accessory Kit | 1 | | HWKIT,Assembly HDWR & PARTS | 1 | | Wire, Jumper, 6", Red | 1 | | LIT,WLTL21104,TS 214998- | 1 | | DECAL,WLTL21104,HOOD 214999- | 1 | |
|
