Motor, Drive
|
|
|
Drive motor.
This is a NEW style upgraded motor designed to fit your machine. There is no longer a need for an external fan, but the flywheel will need to be transfered from your previous motor. This motor will look different, but will install the same.
Here is video to help assist with the transfer of the flywheel.
https://www.youtube.com/watch?v=jedHzXZ6iu4 |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM Qty | 1 | Screw | 19 | 2 | M4 X 25MM SCREW | 4 | 3 | Screw | 2 | 4 | Screw | 2 | 5 | Screw | 4 | 6 | Screw | 4 | 7 | Washer, Star | 1 | 8 | Washer, Locking | 4 | 9 | Nut | 2 | 10 | Washer | 4 | 11 | Screw | 5 | 12 | Screw | 13 | 13 | Screw | 3 | 14 | M8 X 35MM SCREW | 2 | 15 | Screw | 2 | 16 | Screw | 2 | 17 | Screw | 2 | 18 | Screw | 1 | 19 | Screw | 1 | 20 | Screw | 2 | 21 | Screw | 1 | 22 | Screw | 9 | 23 | Screw | 8 | 24 | Screw | 2 | 25 | Screw | 2 | 26 | Screw | 1 | 27 | Screw | 1 | 28 | Screw | 4 | 29 | Washer | 2 | 30 | Washer, Flat | 2 | 31 | Nut, Nylock | 3 | 32 | Nut, Motor | 2 | 33 | Nut, Locking | 4 | 34 | Wrench, Allen | 1 | 35 | Cushion, Platform | 2 | 36 | Nut | 2 | 37 | Tinnerman Clip | 3 | 38 | CAGE NUT | 4 | 39 | NLA Rail, Deck, Left | 1 | 40 | Wire Harness | 1 | 41 | Guide, Belt | 2 | 42 | Magnet | 1 | 43 | Belt, Drive | 1 | 44 | Roller, Front | 1 | 45 | Treadbelt | 1 | 46 | BRD,WLK,ARPS,W/RI&DECAL | 1 | 47 | NLA Rail, Foot, Right | 1 | 49 | Decal,Warning | 1 | 50 | Spacer | 2 | 51 | NLA Foot, Left | 1 | 52 | NLA Foot, Rear, Right | 1 | 53 | Cover, Motor | 1 | 54 | RPM sensor | 1 | 55 | Retainer Clamp | 1 | 56 | Wheel | 2 | 57 | Wire, Jumper, Black | 1 | 58 | Motor, Incline | 1 | 59 | Bracket, Roller, Rear | 2 | 60 | Motor, Drive | 1 | 61 | Bracket, Motor | 1 | 62 | Wire tie | 3 | 63 | Frame, Lift | 1 | 64 | Hex Nut | 2 | 65 | Power Cord | 1 | 66 | Controller, Motor | 1 | 67 | Grommet, Strain Relief | 1 | 68 | Switch, On/Off | 1 | 69 | Cover, Motor, Lower | 1 | 70 | Washer, Star | 2 | 71 | Bracket, Latch | 1 | 72 | Pin, Latch | 1 | 73 | LEFT UPRIGHT | 1 | 75 | Wire Harness | 1 | 76 | Screw | 2 | 77 | NLA Wire harness, Upright, 75" | 1 | 78 | RIGHT UPRIGHT | 1 | 79 | Spacer | 4 | 80 | Spacer, Upright, Right | 1 | 81 | Bumper, Leveler | 4 | 82 | Endcap, Base | 2 | 83 | LEFT UPRIGHT SPACER | 1 | 84 | Decal, Caution, English | 2 | 85 | UPRT,BASE,ARPS,W/DECAL | 1 | 86 | Wheel | 2 | 87 | Console, Display | 1 | 88 | CNSL,BASE,GIAMBI 30,EBONY | 1 | 89 | Handlebar, Left | 1 | 90 | HB,1 BEND,RT,ARPS | 1 | 91 | Endcap | 2 | 92 | Cable Tie, Mounting | 2 | 93 | Safety Key | 1 | 94 | Wire Tie | 2 | 95 | Cable Tie | 10 | 97 | Door, Access | 1 | 98 | Clamp, Cable, Long | 1 | 99 | Spacer | 1 | 100 | Roller, Rear | 1 | 101 | Screw | 4 | 102 | Wire, Jumper | 1 | 103 | End Cap, Rectangle, Internal | 2 | 104 | Spacer | 2 | 105 | Tool, Wrench | 1 | 106 | Tool, Belt Adjustment | 1 | 107 | Clamp, Console, Rubber | 4 | 108 | Wire, Green | 1 | 109 | PULSE SUPPORT | 1 | 110 | CNSL,CUPHOLDER,LT | 1 | 111 | CNSL,CUPHOLDER,RT | 1 | 112 | Endcap, Handrail | 2 | 114 | PULSE PLATE KIT | 1 | 115 | Clip | 1 | 116 | PLATE,INCLN,1.19X1.05" 162344C | 1 | 117 | Screw | 2 | 118 | Wire harness, 20" | 1 | | WIRE,JMPR,006",Black,M/F 114011D | 1 | | Wire, Jumper, 6", Red | 1 | | Wire Harness, Jumper, Blue 6" | 1 | | Wire, Jumper, Blue | 1 | | Wire harness, 20" | 1 | | Envelope | 1 | | USER'S MANUAL | 1 | | LITPAC NOTE: | 1 | | HWKIT,Assembly HDWR & PARTS | 1 | | NLA Adapter, I-POD, Kit | 1 | | NLA Heart Rate monitor, kit | 1 | | Accessory Kit | 1 | | Lubricant, Treadbelt | 1 | | Kit, Lube | 1 | |
|